Comments for sfpeter.com http://www.sfpeter.com must have blog. Wed, 21 Dec 2011 19:08:19 +0000 hourly 1 http://wordpress.org/?v=3.3.2 Comment on new Trendnet TV-IP400W controller for Zoneminder 1.23.x by Atle http://www.sfpeter.com/2008/07/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/#comment-1370 Atle Wed, 21 Dec 2011 19:08:19 +0000 http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/#comment-1370 Hi ! Thx Peter for the drivers ! I have been using your old driver for my old Ubuntu server with great luck. Never a probem. The problem arrived when I did a new installation in my server soft. Using now Ubuntu 11.10 Installed Zoneminder from GUI, no failure and started straight away as it should. I installed your new driver for the TV-IP400W as you have described. Seems like its not working properly, but it can be something else that is wrong too. I cant get in touch with the camera. I can insert all driver details, all the rest as you described, but still no picture and contrl. The IP adress is red marked, so I dont think Im in contact with the camera at all. Checked IP and all, it works from windows with the same IP. Any good tips here ? @Stu, how did you set yours up, as I can see you got it up ok. ? Have a nice Christmas from Norway :) @ Hi !
Thx Peter for the drivers !
I have been using your old driver for my old Ubuntu server with great luck. Never a probem.

The problem arrived when I did a new installation in my server soft.
Using now Ubuntu 11.10
Installed Zoneminder from GUI, no failure and started straight away as it should.

I installed your new driver for the TV-IP400W as you have described.
Seems like its not working properly, but it can be something else that is wrong too.

I cant get in touch with the camera.
I can insert all driver details, all the rest as you described, but still no picture and contrl.
The IP adress is red marked, so I dont think Im in contact with the camera at all.
Checked IP and all, it works from windows with the same IP.

Any good tips here ?

@Stu, how did you set yours up, as I can see you got it up ok. ?

Have a nice Christmas from Norway :)
@

]]> Comment on jQuery plugin for communication between browser windows by Hannes http://www.sfpeter.com/2008/03/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1366 Hannes Fri, 26 Aug 2011 14:12:26 +0000 http://www.sfpeter.com/2008/03/13/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1366 Nevermind my last comment. It works. Nevermind my last comment. It works.

]]> Comment on jQuery plugin for communication between browser windows by Hannes http://www.sfpeter.com/2008/03/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1365 Hannes Fri, 26 Aug 2011 13:59:04 +0000 http://www.sfpeter.com/2008/03/13/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1365 Hey, unfortunately I can't get triggerWindowEvent to work on a child window using the current FF and the current Opera - the form fields' values get set correctly, but the "click" event doesn't get fired. Triggering a parent function from a child window works, though. Hey,

unfortunately I can’t get triggerWindowEvent to work on a child window using the current FF and the current Opera – the form fields’ values get set correctly, but the “click” event doesn’t get fired. Triggering a parent function from a child window works, though.

]]> Comment on jQuery plugin for communication between browser windows by al; http://www.sfpeter.com/2008/03/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1364 al; Wed, 24 Aug 2011 10:48:39 +0000 http://www.sfpeter.com/2008/03/13/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1364 I've high hopes for this plugin! I need to communicate between a page and an iframe on that page - can you give an example of how that might work? thanks! Al; I’ve high hopes for this plugin! I need to communicate between a page and an iframe on that page – can you give an example of how that might work?

thanks!
Al;

]]> Comment on new Trendnet TV-IP400W controller for Zoneminder 1.23.x by Gene http://www.sfpeter.com/2008/07/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/#comment-1363 Gene Wed, 10 Aug 2011 08:17:24 +0000 http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/#comment-1363 I have not used Linux before, but a friend will help with the setup of that. I'm thinking of using Ubuntu and Zoneminder rather than the IE on $indows to run my 8 IP cameras, but I'm looking for suggestions from those of you who know these programs. Most of my cameras are Trendnet (TV-IP410, TV-IP422W, TV-IP501W, TV-IP501P, and TV-IP512P). The TV-IP422W and TV-IP410 have PTZ. All but the TV-IP410 have either 1 way audio or 2 way audio. Can you tell me if the PTZ and audio will work with this setup? Thanks... I have not used Linux before, but a friend will help with the setup of that. I’m thinking of using Ubuntu and Zoneminder rather than the IE on $indows to run my 8 IP cameras, but I’m looking for suggestions from those of you who know these programs. Most of my cameras are Trendnet (TV-IP410, TV-IP422W, TV-IP501W, TV-IP501P, and TV-IP512P). The TV-IP422W and TV-IP410 have PTZ. All but the TV-IP410 have either 1 way audio or 2 way audio. Can you tell me if the PTZ and audio will work with this setup? Thanks…

]]> Comment on new Trendnet TV-IP400W controller for Zoneminder 1.23.x by Vortex http://www.sfpeter.com/2008/07/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/#comment-1362 Vortex Fri, 05 Aug 2011 17:05:41 +0000 http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/#comment-1362 @Davis Computer ~ If you don't mind, would you share your resolution? I get the same error. Which filename was missing and what other filename issue was it? Thanks! @Davis Computer ~ If you don’t mind, would you share your resolution? I get the same error. Which filename was missing and what other filename issue was it?

Thanks!

]]> Comment on Ruby controller for the Trendnet TV-IP400W PTZ camera by Rich Leyden http://www.sfpeter.com/2008/02/ruby-controller-for-the-trendnet-ip-400w-ptz-camera/#comment-1359 Rich Leyden Sat, 11 Jun 2011 04:16:45 +0000 http://www.sfpeter.com/2008/02/29/ruby-controller-for-the-trendnet-ip-400w-ptz-camera/#comment-1359 Thanks for the ruby script, it was just what I was looking for. I just bought the Trentnet IP400 on Ebay and was disappointed it didn't have a auto pan mode. I'd like to coordinate frame capture at each of several positions. I suppose there would be several ways to do that in Ruby but this is my first Ruby experience so it may take me a while to figure it out. Thanks for the ruby script, it was just what I was looking for.
I just bought the Trentnet IP400 on Ebay and was disappointed it didn’t have a auto pan mode. I’d like to coordinate frame capture at each of several positions. I suppose there would be several ways to do that in Ruby but this is my first Ruby experience so it may take me a while to figure it out.

]]> Comment on jQuery plugin for communication between browser windows by peter http://www.sfpeter.com/2008/03/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1352 peter Thu, 03 Mar 2011 22:21:31 +0000 http://www.sfpeter.com/2008/03/13/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1352 thanks for the feedback Frank, I've actually started using this plugin myself again recently, and I'll try to incorporate your changes along with a couple of other improvements I was planning on making. thanks for the feedback Frank, I’ve actually started using this plugin myself again recently, and I’ll try to incorporate your changes along with a couple of other improvements I was planning on making.

]]> Comment on jQuery plugin for communication between browser windows by Frank http://www.sfpeter.com/2008/03/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1205 Frank Tue, 15 Feb 2011 18:35:17 +0000 http://www.sfpeter.com/2008/03/13/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1205 Ok, found something that works, at least for an event from child to parent in IE8. First off don't use window.open(), in my script, I used window.showModalDialog(). You should pass the parent window as an argument to showModalDialog(), as such: onclick = 'window.showModalDialog(\"page.php\", window);' next change line #41 in peter's script from: $.triggerWindowEvent(window.opener, event, msg); to: $.triggerWindowEvent(window.dialogArguments, event, msg); That's what did the trick for me, but I only needed the one way communication. Good luck! Ok, found something that works, at least for an event from child to parent in IE8. First off don’t use window.open(), in my script, I used window.showModalDialog(). You should pass the parent window as an argument to showModalDialog(), as such:

onclick = ‘window.showModalDialog(\”page.php\”, window);’

next change line #41 in peter’s script from:

$.triggerWindowEvent(window.opener, event, msg);

to:

$.triggerWindowEvent(window.dialogArguments, event, msg);

That’s what did the trick for me, but I only needed the one way communication. Good luck!

]]> Comment on jQuery plugin for communication between browser windows by Frank http://www.sfpeter.com/2008/03/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1203 Frank Tue, 15 Feb 2011 17:30:06 +0000 http://www.sfpeter.com/2008/03/13/communication-between-browser-windows-with-jquery-my-new-plugin/#comment-1203 Yes, very great plugin, except it doesn't work in IE8, but then again what does? Thank you and i'll post if I find a way to make it work in IE8! Yes, very great plugin, except it doesn’t work in IE8, but then again what does? Thank you and i’ll post if I find a way to make it work in IE8!

]]>